This page will give you information about using your DEXIN®. Please follow the step by step procedure given below as well as on the gallon in order to get the best result.

1 - Apply water on the surface to be cleaned.

2 - Take a PLASTIC BUCKET and mix DEXIN® in clean water with a ratio of one part of DEXIN® ( by volume) to 1 or 2 or3 or 4 or 5 or 6 parts of water. ( mixing ratio depends on the strength of cement and dirt to be removed ).

3 - Use mixed solution of DEXIN and water few times, using medium-hard brush to get better result.

4 - Finally wash the surface well with clean water.

After cleaning iron surfaces, it is necessary to rinse the iron with clean water, let the surface dry and than spray diesel finally to protect from rust.